P Series Hot Pressing Laboratory Vacuum Furnace

• Type: Stainless Steel Heating Equipment
• Structure: Horizontal Type

Product Description

P series Hot pressing Laboratory Vacuum furnace

Feature
A vacuum hot pressing furnace is a complete set of equipment that forms materials by hot pressing under vacuum (or other atmosphere) conditions. It mainly uses resistance or induction heating, and is pressurized up and down by a pressure head driven by an oil cylinder. At high temperatures, the solid particles of the raw material are bonded together, the grains grow, the voids (pores) and grain boundaries gradually decrease, and through material transfer, their total volume shrinks, the density increases, and finally becomes a dense polycrystalline sintered body with a certain microstructure, thereby pressing the material into shape.

Adopting a horizontal and side door opening structure: high precision in loading and unloading molds.

Fast temperature rise and fall: the induction heating rate is 100 ºC per minute (less than or equal to 1600 ºC), and the resistance rate is 20 ºC per minute (greater than 1600 ºC);

Good temperature uniformity: The average temperature uniformity is plus or minus 5 ºC (measured at five points, with a constant temperature zone of 1000 ºC for one hour before testing);

High pressure accuracy: Using a hydraulic control system, the pressure accuracy is 0.3%.

Adopting single temperature zone control: reserving two temperature measurement holes for high-temperature detection.

Good safety performance: Adopting HMI+PLC+PID pressure sensor control, safe and reliable;

Good sealing performance: The dynamic pressure heads are sealed with corrugated pipes to ensure no air leakage.

Specifications

Series	No.	Max.Temperature (ºC)	Heater	Chamber Size (mm)	External Dimentions(mm)	GW (Kg)	Pressure (kN)	Heating Power(kW)	Ultimate Vacuum(Pa)	Application
P2 Hot-pressing	P2GR20	2000	Graphite resistor	200×200×300	1425×1550×1850	1500	300	45	6.7*10^-3	Hot-press/Sintering
	P2GR23	2300	Graphite resistor	200×200×300	1425×1550×1850	1500	300	50	6.7*10^-3	Hot-press/Sintering
	P2CO20	2000	Induction AC	200×200	1425×1550×1850	1600	300	45	6.7*10^-3	Hot-press/Sintering
	P2CO23	2300	Induction AC	200×200	1425×1550×1850	1600	300	50	6.7*10^-3	Hot-press/Sintering

Application

Cemented Carbide(WC,TiC)

Performs dewaxing, degassing, and sintering in sequence

Oxide Ceramics

Performs dewaxing, degassing, and sintering processes in sequence

Application: Aluminium Oxide(Al2O3), Zirconium Oxide(ZrO2) 

Non-Oxide Ceramics 

Performs dewaxing, degassing, and sintering processes in sequence

Application: Silicon Carbide(SiC), Silicon Nitride(Si3N4), Aluminum Nitride (AlN) 

Metals and Alloys 

Performs dewaxing, degassing, and sintering in sequence

Graphite 

Performs degassing and purification in sequence